BUY MORE, SAVE MORE!

• $12.85 each when you buy 8 or more

SIMPLE, EFFECTIVE, INEXPENSIVE WAY TO COLLECT RAIN!

Our 3x4" Flex-Fit Downspout Diverter collects rainwater from 3x4" gutter downspouts and feeds it into a rain barrel. When installed with the Flexi-Fit Fill Hose and Inlet Hose Seal into the side of your barrel, it provides an overflow mechanism that feeds extra water back down your downspouts.

• Easy to install! Simply use a 2-1/8" hole saw to drill into your downspout and the Flexi-Fit Diverter fits right in
• Large, 1-1/4" outlet allows plenty of water to pass to your barrel/tank (connect with the Flexi-Fit Fill Hose and an Inlet Hose Seal for a watertight fit)
• Large overflow opening allows water to easily pass back through the downspout once your barrel/tank is full
• Works with 3"x4" downspouts

*Required for installation:

-(1) 2-1/8" hole saw

-(2) 3/4" self-tapping Philips screws (included)

-(1) Fill hose (1" PVC will also fit inside diverter if you need more length than 31")

-(1) Hose seal

-(1) Winter Cap (if you are in an area where temperatures get below freezing)

Installs in three easy steps:

1) Drill hole in downspout (you will need 2-1/8" hole saw for installation, which you can purchase here). For 3"x4" downspouts, drill hole in the side of the downspout (3" side). Ensure hole is level with inlet on barrel. For round downspouts, try our Round Downspout Diverter.
2) Insert diverter and fasten diverter to downspout with self-tap screws
3) Attach fill hose to diverter and into barrel hose seal, and start collecting rain!