SIMPLE, EFFECTIVE, INEXPENSIVE WAY TO HARVEST RAIN!

We at Rain Brothers, LLC have been designing, constructing, and installing rainwater harvesting systems -- both residential- and commercial-scale -- in the Ohio Region for nearly two decades, and we have used virtually every rainwater downspout diverter on the market. With the diverters on the market, there are recurring problems, including:

1) Difficult installation

2) Insufficient outlet size

3) Insufficient overflow, causing diverter to back up drainage

4) Working only with the smallest downspouts (i.e., 2"x3")

Our Flex-Fit Downspout Diverter addresses these issues and offers a thoughtful, high-quality, affordable solution by being:

1) Easy to install. There is no need to cut your downspout. Simply use a 2-1/8" hole saw to drill into your downspout and the Flexi-Fit Diverter fits right in

2) Large, 1-1/4" outlet allows plenty of water to pass to your barrel/tank

3) Large overflow opening allows water to easily pass back through the downspout once your barrel/tank is full

4) Works with both 2"x3" and 3"x4" downspouts ( check out specialized 3x4" downspout diverter here! ). It will also fit in other size downspouts such as 2.5" square & 2.75" square, but will be a little less efficient.

*Required for installation:

-(1) 2-1/8" hole saw (NOT INCLUDED)

-(2) 3/4" self-tapping philips screws (included)

-(1) Fill hose (1" PVC will also fit inside diverter) (NOT INCLUDED)

-(1) Hose seal (NOT INCLUDED)

-(1) Winter Cap (if you are in an area where temperatures get below freezing) (NOT INCLUDED)

Installs in three easy steps:

1) Drill hole in downspout (you will need 2-1/8" hole saw for installation, which you can purchase here ). For 2"x3" downspouts, drill hole in front of downspout. For 3"x4" downspouts, drill hole in the side of the downspout (3" side). Or, check out our specialized 3x4" diverter here ! Ensure hole is level with inlet on barrel. For round downspouts, try our Round Downspout Diverter.
2) Insert diverter and fasten diverter to downspout with self-tap screws
3) Attach fill hose to diverter and into barrel hose seal , and start collecting rain!