Free or Fixed Shipping
On most products!
Need Help With Installation?
With decades of field experience we'll walk you through each step of your installation.
Field Tested
Quality products, lowest prices guaranteed!
Price Match
Found a better price? We'll match it. Contact us for our price match guarantee!
No-Lead Pressure Relief Valve 100 PSI
Valves set at 100 PSI
Recommended for all cold water system installations - to protect against damage to piping and pressure tanks. PRV's are set at 75 PSI or 100 PSI. PRV's have a plus/minus 15% setting accuracy
Note: Merrill pressure relief valves may not reseat themselves after pressure relief. Manual disassembly and reseating of the valve may be required. Repeated opening of a pressure relief valve is beyond intended use and voids warranty
*Note: ALL PRV valves are field adjustable - by removing the cap and turning internal disk down to increase pressure. Field adjustment of valve voids warranty.
**Note: Valve warranty voids after a change in adjustment due to possible error
Warning: ALL PRV, SSPRV, and PRVNL valves must be set a minimum of 15 PSI above the typical high of the water system pressure, so valve chatter or rapid open and close will not occur. Valve chatter can cause the failure of the valve and voids warranty.
