Blog Layout

UV Sterilization in Rain Harvesting Systems

Jonathan Meier • January 7, 2021


Ultra-violet sterilization units should be installed last in the filtration set-up.  Because water clarity is important in ensuring good penetration (and therefore optimal sterilization) by the UV lamp, it is vital to have all the layers of sediment filtration occur prior to the UV lamp, as shown here. 

 

Irrigation Systems
Install a Visy Vortex Filter

How to Install a Wisy Vortex Filter for Rainwater Prefiltration

By Rain Brothers • October 31, 2024
Install a Wisy Vortex Filter with ease! This step-by-step guide covers prepping the base, positioning pipes, sealing joints, and ensuring optimal filtration. Perfect for DIY homeowners ready to tackle a rewarding project.
Rainwater Harvesting System Installation

Ohio Health Department Approved Rainwater Harvesting Installation

By Rain Brothers • October 30, 2024
Learn how to install an Ohio Health Department-approved 5500-gallon rainwater harvesting system with our step-by-step guide. Components available for purchase or custom installation requests.
Installing ozone generator into water tank

Enhance Your Rainwater Harvesting System with an Ozone Generator

By Rain Brothers • October 28, 2024
Keep your rainwater clean and fresh with an ozone generator and floating tether system. Learn how to install the JED 203 model in your cistern to control algae and bacteria without harsh chemicals.
How To Install Your New Springer Series Cistern Pump

Installing Your Springer Series Cistern Pump: A Comprehensive Guide

By Rain Brothers • October 24, 2024
Installing a cistern pump can seem daunting, especially if you're not familiar with the ins and outs of pump mechanics. Follow these quick tips to ensure a smooth setup and efficient operation.
Underground Reservoir Systems for Low Yield Wells

Underground Reservoir Systems for Low Yield Wells

By Jonathan Meier • October 21, 2024
In today's blog post, we're diving into the details of creating an underground reservoir for low flow, low yield wells. This method provides a more reliable water system, especially when you need more than just a 500-gallon basement tank
Submersible Pumps for Drip Irrigation

How To Use Submersible Pumps for Drip Irrigation

By Jonathan Meier • October 9, 2024
Learn how to effectively use a submersible pump for drip irrigation. Avoid common mistakes with drip tape, emitters, and tubing, and discover solutions to optimize your irrigation system's flow and pressure.
What To Do With An Old Cistern

What To Do With An Old Cistern

By Jonathan Meier • July 14, 2024
Discover an old cistern in your yard? Learn how to restore or replace it with our comprehensive guide. From debris removal to ensuring water tightness, we cover all steps to make your cistern functional and valuable. Contact us for expert advice and products to ease your restoration project.

How to Determine Your Rainwater Harvesting Tank Size

By Jonathan Meier • July 1, 2024
Learn how to determine the right size for your rainwater harvesting tank with our comprehensive guide. Tailored for the Midwest U.S., our tips cover key considerations for various household sizes and usage needs.
Water Storage Systems: A Solution for Low Yield Wells

Water Storage Systems: A Solution for Low Yield Wells

By Rain Brothers • June 25, 2024
Discover effective water storage systems for low yield wells. Learn how to install a reservoir tank to ensure a consistent water supply, transforming your low-producing well into a reliable source.
Plumbing Rainwater Systems For Homes

Plumbing Rainwater Systems For Homes: What You Need To Know

By Jonathan Meier • June 20, 2024
Learn how to effectively set up plumbing rainwater systems for homes while navigating local regulations, ensuring cost-effectiveness, and optimizing water conservation for non-potable uses like toilets, laundry, and irrigation
More Posts
Share by: